Maintenance of illuminated signs - service and instructions

Maintenance of illuminated signs is important to maintain the appearance, functionality and safety of signs. Regular control, proper cleaning and timely elimination of defects can contribute to a longer useful life of signage and reduce the risk of unplanned interventions.

Maintenance of illuminated signs - illustration with instructions

Metaling DOO Belgrade provides maintenance and service of illuminated signage, including checking LED lighting, replacement of defective components, restoration of signage graphics and repair of damaged structural elements.

We maintain various types of signs: 3D illuminated letters, LED signage boxes, signboards, totems, pylons and other illuminated constructions. It is also possible to service commercials from other manufacturers, after assessing the technical condition and the availability of suitable replacement parts.

On this page there are basic recommendations for maintaining signs, as well as documentation that Metaling makes available to its users.

Why is regular maintenance of illuminated signs important?

The sign is part of the company's visual identity. Defective LED lighting, dirty front, damaged vinyl film or corrosion of the structure can negatively affect the appearance and readability of the sign.

During the use of signs, various materials are exposed to external influences, including solar radiation, temperature changes, precipitation, dust and pollution.

Regular maintenance allows changes in signage to be noticed in time and appropriate measures taken.

The most common problems with illuminated signage

  • Reduced intensity or non-uniformity of LED lighting,
  • Complete or partial shutdown of lighting,
  • Damage to the power supply and electrical components,
  • Faded or damaged signage vinyl film,
  • Dirty or scratched translucent surfaces,
  • Damage to acrylic and other materials,
  • Corrosion of metal elements,
  • Changes to fasteners and construction,
  • Penetration of moisture and damage caused by atmospheric influences.

The type of intervention depends on the cause of the problem, the construction of the sign and its general condition.

Regular maintenance of illuminated signs - recommended activities

Regular maintenance of illuminated signs includes visual and technical checks that are planned according to the type of sign, its location and conditions of use. Proper inspection planning allows timely detection of damage and defects.

For certain signage surfaces, it is possible to organize cleaning every four to six months, while locations with a greater amount of dust, traffic pollution or other unfavorable conditions may require more frequent cleaning.

This interval is an indicative recommendation for inspection and cleaning, not a universal service term for all types of sign structures.

Visual Inspection of the Sign

During a regular review, the user can pay attention to changes that are visible from a safe place:

  • Are all illuminated elements working properly,
  • Is the lighting even,
  • Does damage appear on the front of the sign,
  • Does the vinyl peel or change colour,
  • Are there visible signs of corrosion on the structure,
  • Is there visible deformation or displacement.

If damage is observed that may pose a risk, use should be discontinued when it is safe to do so and professional inspection should be requested.

When is a professional signage service needed?

Professional intervention is required when the fault is related to electrical components, structural damage, water ingress, or elements that cannot be safely accessed.

Opening the signage box, replacing the power supply, working on electrical installations and interventions at height are not jobs intended for untrained users.

Maintenance of illuminated signs - proper cleaning

Cleaning of illuminated signs must be adapted to the material from which the sign is made. Different surfaces require different means and maintenance procedures.

Before cleaning the electric sign, it is necessary to turn off its power supply in the designated place, following the manufacturer's instructions and safety procedures.

The user should only clean easily accessible external surfaces for which such a procedure is provided. If cleaning requires working at height, opening the case or accessing electrical components, a professional should be hired.

Cleaning of acrylic and Plexiglas illuminated signs

Acrylic, i.e. acrylic glass, requires careful cleaning to reduce the possibility of scratching, clouding and chemical damage to the surface.

For normal soiling, a soft, clean cloth without abrasive fibers and a suitable mild solution of water and detergent may be used, when such treatment is permitted according to the material manufacturer's instructions.

Abrasive sponges, aggressive solvents, acetone or universally applied alcohol or glass cleaners should not be used. Certain agents can damage acrylic surfaces.

Before using a specialized agent, it is necessary to check its compatibility with the specific type of acrylic.

More information on the maintenance of acrylic surfaces is available in the technical recommendations of the manufacturer PLEXIGLAS.

Cleaning of aluminium and metal signage surfaces

Aluminium and other metal surfaces may have a plasticized, painted, brushed or other finish.

The cleaning agent is selected according to the specific material and type of final protection.

It is customary to use non-abrasive procedures and agents that do not damage the surface layer, with a prior compatibility check.

Damage to the paint, protective layer or metal elements should be assessed separately before undertaking any repairs.

Cleaning vinyl film signs

Signage vinyl films require maintenance that corresponds to their type, method of application and possible protective layers.

For cleaning, you should use the means intended for specific graphic material. It is recommended to avoid rough rubbing, abrasive agents and aggressive chemicals.

Before applying a new agent, it is useful to check the vinyl film manufacturer's recommendations and perform a test on a suitable less visible part of the surface, when permitted.

Drying the sign after cleaning

After cleaning the signage surface, it is necessary to ensure complete drying of the parts that were exposed to moisture.

There is no single drying time that can guarantee the safety of every illuminated sign. It depends on the construction, the way of cleaning and the possibility of water penetration to the electrical components.

If there is any doubt that water has reached the signage housing or the electrical installations, the sign should not be switched on again before a proper professional check.

Maintenance of illuminated signs - construction and corrosion protection

Metal supports and constructions of outdoor signs are exposed to atmospheric influences, so their condition should be monitored during the use of signage.

Corrosion resistance depends on the material, quality of surface protection, environmental conditions and maintenance methods.

Corrosion of steel parts of signage

Corrosion can occur on steel elements, especially when the protective layer is damaged or the structure is exposed to adverse conditions.

The timing of corrosion is not universal and cannot be reliably determined based on the age of the sign alone.

Depending on the condition of the structure, remediation may require removal of corrosion, preparation of the substrate and restoration of the appropriate protective system.

When corrosion affects the supporting or fastening elements, a professional stability check is necessary before carrying out repairs.

Control of brackets and fasteners

In the case of facade, roof and free-standing signs, the condition of the supports and fastening elements is particularly important.

Visible deformations, displacements, damage to welded joints or pronounced corrosion are grounds for professional inspection.

The stability check and possible structural interventions are carried out according to the technical requirements of the specific signage medium.

Maintenance of signage vinyl film and printed signs

Maintenance of signage vinyl film involves proper cleaning and monitoring of their appearance during use.

Over time, depending on the type of material and exposure conditions, colour changes, surface damage or separation of the vinyl film from the substrate may occur.

Durability and warranty of 3M signage vinyl film

Metaling uses various types of signage vinyl film, including materials from the manufacturer 3M.

The warranty period and the expected characteristics of the vinyl film depend on the specific product, the type of graphic, the method of application and the exposure conditions.

Therefore, it is not correct to assume that all vinyl films have the same warranty period or that every vinyl film should be automatically replaced upon its expiry.

The decision to replace is made according to the condition of the graphics, technical documentation and user needs.

Information on features and maintenance conditions is available in the official 3M Graphics & Signage technical documentation.

Replacement of damaged signage vinyl film

If there is significant damage, discoloration or separation of the graphics, replacement of the existing foil inscription may be considered.

Before installing a new vinyl film, it is necessary to assess the condition of the substrate and the possibility of removing the old graphics without damaging the signage surface.

For certain signs it is possible to replace only damaged graphic elements, without manufacturing a complete new case.

Maintenance of illuminated signs - LED lighting and power supply

Maintenance of LED lighting includes checking the functionality of light elements, power supply and associated electrical components.

The operation of the LED system is affected by the quality of the built-in components, power supply, temperature conditions, heat dissipation and other construction properties.

The most common failures of LED lighting

The following problems may occur with illuminated signs:

  • Complete blackout,
  • Stopping the operation of individual LED modules,
  • Uneven lighting of the signage surface,
  • Intermittent flickering or interruptions,
  • Faulty or inadequate power supply,
  • Damage to electrical connections,
  • Problems caused by moisture or overheating.

The exact cause of the failure is determined by inspection and appropriate diagnostics.

Replacement of LED module and power supply

Replacing LED modules, power supplies and other electrical components requires knowledge of the technical characteristics of the signage system.

Inappropriate replacement equipment may result in improper operation or further damage.

Such work should be performed by professionally qualified persons, with appropriate electrical safety measures.

Users are not recommended to independently open signage boxes and intervene on internal electrical components.

Working temperature of LED sign

Permissible operating temperature conditions differ according to the type of LED module, power supply and other built-in components.

The values specified in the specification of the LED chip do not necessarily represent the permissible ambient temperature for the operation of the complete sign.

Therefore, the technical documentation of the specific equipment and the stipulated ventilation and heat removal conditions should be respected.

In case of signs of overheating, deformation or improper operation, a professional inspection should be requested.

Service and repair of damaged illuminated signs

Metaling provides service and repair of illuminated signs, depending on their condition and the technical feasibility of the intervention.

The service may include the replacement of LED modules, power supplies, acrylic faces, aluminium elements, signage vinyl film and other components.

Repair or replacement of signage elements

When only part of the sign is damaged, it is possible to consider the creation of a replacement element according to the existing form and artwork.

In case of major damage, it is necessary to assess whether repair or production of a new signage medium is justified.

Modernization of existing signs with LED lighting

For suitable older sign structures, it is possible to consider replacing the existing lighting system with modern LED lighting.

Such modernization requires verification of construction, power supply, lighting arrangement and electrical compatibility.

Potential electricity savings depend on the consumption of the existing system, the characteristics of the new components and the time of use of the sign.

For information on field interventions, see signage installation and service - Metaling.

Lighting signage maintenance - warranty and service

The warranty on the sign and its components is determined according to the warranty documentation, the conditions of the specific product and the applicable regulations.

Warranty terms may vary for construction, LED lighting, power supplies, signage vinyl film and other built-in materials.

Before independently opening the sign or any intervention, it is advisable to contact the manufacturer or an authorized service.

Inappropriate interventions may cause additional damage and affect the realization of warranty rights in accordance with the applicable conditions and regulations.

The existence of a warranty does not change the obligation of safe use of the electric signage device.

Signage Handling and Maintenance Instructions - PDF Documentation

Metaling provides users with documentation with information on the handling, cleaning and maintenance of various signs.

Below are existing instructions, which should be used with the technical documentation of the specific installed product.

Important note: For the selection of cleaning agents, electrical interventions and warranty conditions, it is necessary to apply the current documentation corresponding to the specific product. If the older instructions are inconsistent with the valid technical recommendations, an updated instruction should be requested from Metaling before the intervention.

Illuminated Sign Maintenance – Frequently Asked Questions

How often should an illuminated sign be cleaned?

Frequency depends on location, material and environmental conditions. Inspection and cleaning can be planned for four to six months for individual signage surfaces, while more exposed locations may require more frequent maintenance.

Can acrylic signage be cleaned with alcohol?

Alcohol is not a universally recommended acrylic cleaner. Certain types of acrylic glass can be sensitive to alcohol and other solvents. Means approved for the specific material should be used.

Is it possible to clean the illuminated sign by yourself?

The user may only clean accessible external surfaces when specified in the manufacturer's instructions and when the work can be done safely, without opening the case and accessing electrical components. Before cleaning, it is necessary to turn off the power according to the instructions.

Should You Wait 24 Hours After Cleaning a Sign?

Reboot security cannot be determined by a unique time interval. It is important that the corresponding parts are completely dry. If there is any suspicion of water ingress into the electrical enclosure, a professional check is required before switching on.

How long is the warranty for LED lighting?

The warranty period depends on the specific sign, the built-in LED components and the conditions specified in the warranty documentation. For accurate data, it is necessary to check the documentation of the delivered product.

Does signage vinyl film have to be replaced after the warranty expires?

Not automatically. The replacement depends on the condition of the vinyl film, the characteristics of the material, the conditions of use and the requirements for the appearance of the sign.

Does Metaling service signs from other manufacturers?

Metaling may consider serving third-party signs after reviewing or evaluating available technical information. Feasibility depends on construction, condition of sign and availability of suitable parts.

What is required to report a fault on an illuminated sign?

For the initial evaluation, it is recommended to submit a photo of the sign, the location address, a description of the problem and basic information about the type and dimensions of the sign.

Learn more and request service